Crafted from solid aluminum, this model measures 970mm x 160mm x 80mm and incorporates an advanced carbon fiber heating element. Boasting a robust 2.4kW power output, it is ideally suited for elevated wall or ceiling installation, as it achieves higher surface temperatures ranging from 200 to 300°C. With the capacity to efficiently warm a spacious area spanning 33 to 38 square meters, this heater provides impressive coverage.
With the included remote control, you have the flexibility to select from four distinct heating levels (25%, 50%, 75%, and 100%), in addition to setting specific target temperatures. This level of customization empowers you to fine-tune both the heat intensity and energy consumption to suit your preferences and budget.
For added convenience, this heater is equipped with a built-in motion sensor boasting a 3-meter range. This intelligent sensor automatically deactivates the heater if it detects no movement for a duration of 2 minutes, eliminating concerns about inadvertently leaving your heating system running.
To set up your bar heaters, start by inserting the brackets with threading into the slots located on the rear of the bar heater. Secure them in position using the provided wing nuts. Afterward, affix the non-threaded brackets onto the wall at your desired mounting location. Finally, connect the two sets of brackets at the desired angle for positioning your bar heater using the supplied wing nuts.
Free standing patio heaters can simply be placed on flat ground (or table for table-top patio heaters) and switched on when needed.
Hanging patio heaters can be suspended easily using the durable steel chain, allowing you to suspend it at any height up to 0.6m.
You can save up to 60% off your energy bills compared to other types of electric heating. Not only that, but infrared panels also require zero maintenance as they have no moving parts. They’re also IP rated, making them safe to use in bathrooms, kitchens and even outdoor areas like your patio.
Specification
Wattage | 2400w |
---|---|
Wi-Fi | Yes |
Manufacturer | Mirrorstone |
Surface Material | Aluminium |
Surface Temperature | 115°C |
Dimensions (mm) | 970mm x 160mm x 80mm |
Recommended Fixing | Wall/Ceiling |
Frame Colour | None |
IP Rating | IP65 |
Voltage | 230V |
Flex Cable Length | 1.5m |
Warranty | 2 Years Upgradable to 5 Years |
Panel Weight | 3.2kg |
Heating Element | Carbon Fibre |