Ideal for outdoors, bathrooms and other wet areas. Suitable for any commercial premises where a heating cycle is required to be operational only when a controller is activated. The SLPBWP is an IP65 rated waterproof run-back timer and thermostat which allows the heaters to operate only when the controller is activated. It has a status indicator and operating modes which are set prior to the controller’s installation. In Basic mode, the controller simply switches the heater on and off when the button is pressed. In Timer mode, it acts as a run-back timer where the heating period will be active until the run-back timer expires. In Temperature Control mode, it features temperature control for comfort and setback periods which can also be used in conjunction with the Timer mode.
- IP65 rated
- Can operate multiple SL heaters
- 3 operating modes:
- Basic: Switches the heater on and off when button is pressed.
- Timer: Controller acts as a run-back timer where heating period will be active until runback timer expires.
- Temperature control: Features temperature control for comfort and setback periods.
- Choice of 3 total time periods in Timer mode: 15, 30 or 60 minutes
- Comfort heat setting between 15°C to 35°C Setback temperatures can be used for frost protection or maintaining a minimum room temperature 0°C to 15°C
- 1 light indicator around the button to show the status of the controller
- Easy operation
- External input available to connect to any voltage free contact such as timers or BMS
- Can be powered by either mains 240V or 12VDC which allows SELV (Separated Extra Low Voltage) installation*
*Power adaptor not supplied